Saturday, August 22, 2015

Necessity of Cline Test: Installing Card Sharing Server Basic



Cccam or card sharing is a paid server by which one can share his or her subscriptions to other ones. Suppose you live in a South Asian country, and your friend lives in a European, thus sometimes when you are subscribed, you may see that some channels are there but you cannot access it. So, if your European friend has the access to it, you can tell your friend to share it with you and by these both of you will be equally benefited. It is a very important thing to do the Cline test when setting up your card sharing server. Installing card sharing server is not that tough one, but there are some basics.

First of all, before going for anything, it is better for you to read the manual and then according to that give the basic setup. Without reading this handbook, it is not wise to go for it or starting it. Next what you need is a Linux-based operating box by which you can operate the satellite. So the thing you need now is a Linux satellite box. Dreambox is a preferred box for doing the setup and running thecard sharing server. You should have a broadband internet connection and a satellite dish that is the necessary thing. Cline test cannot be done without these. Further, you will need a router that should be well configured and connected with the Dreambox IP. Here, there is a massive critical point, and that is while using the server you must always use the same IP address in further.

Cline CCcam Server Set Up
 
Well, those were the very basic things, now let’s get started with the middle part. After doing the above things now go to Setup and then Settings/System Settings then network and sharing and after that turn of the DHCP. After setting of the DHCP, enter the specified IP you want to choose there. Now, you can use that particular IP. After that, do the router documentation by expert ones so that you can do Cline test in further. Once these things completed a search to Google about the IP address locations or one can go to the URL: http://www.canyouseeme.org or like this website. After going there or further going to the similar ones, enter the port number and it will be configured automatically. If you have any problems, search in the Google.

Now the last part and that is flashing the Dreambox with the Dream up Program. By this program, you can easily do a reboot and do the reboot box afterward. Lastly now comes out the F & C lines and this is to be considered as the F-lines and the Clines. The Clines are the thing you ought to give to the client and F-line is what you receive in return from him or her. So then you can start up a test that will determine your further connection. Cline test determines it.

The important fact is, after reading all these, maybe you’re thinking that setting up the card sharing is a difficult job. But, when you will start working on it, it will be easy and will be an easy peasy for sure.

No comments:

Post a Comment